5-in-1 multifunction chlorine tablets for regular pool care

Eur-O-Tabs 5-in-1 are slow-dissolving 200g multifunction chlorine tablets designed for the regular treatment of swimming pool water.

Unlike standard slow chlorine, which is mainly used for continuous disinfection, these multifunction tablets combine several pool-care actions in a single product. Their documented functions include water disinfection, algae control, flocculation and water clarification.

The 5kg bucket contains 200g tablets suitable for regular maintenance of private swimming pools.

What is this product used for?

5-in-1 multifunction chlorine helps simplify routine pool maintenance by combining several treatment functions in one tablet.

It is designed to:

• maintain regular chlorine-based disinfection;

• help prevent algae development;

• support flocculation of fine particles;

• help keep pool water clear;

• reduce the number of separate maintenance products required.

The tablets dissolve gradually to provide a continuous treatment.

How to use 5-in-1 multifunction chlorine

Before adding the tablet, check your pool water.

The pH should be between 7.0 and 7.4.

Place the tablet in the skimmer or in a suitable floating chlorine dispenser. Do not place the tablet directly on the pool surface or liner.

Regularly check the chlorine level and cyanuric acid level and adjust treatment according to the condition of the water, pool temperature and bathing load.

Always follow the instructions and safety information shown on the product label.

Dosage and frequency

Recommended dosage:

1 x 200g tablet per 30 m³ of pool water.

Example:

• 30 m³ pool: 1 tablet

• 60 m³ pool: 2 tablets

• 90 m³ pool: 3 tablets

The required frequency is not fixed. It depends on factors such as water temperature, pool use and measured chlorine level.

Regular water testing is therefore recommended rather than adding tablets according to a fixed calendar.

Before swimming, make sure the chlorine level is below 2 ppm. The cyanuric acid level should not exceed 70 ppm.

Compatibility

This product is intended for regular chlorine treatment of swimming pools.

The tablets can be used through:

• a swimming pool skimmer;

• a suitable floating chlorine dispenser.

Compatibility with a specific automatic dosing device, filtration system, spa or other treatment method should only be stated when confirmed by the equipment manufacturer and the product label.

Main benefits

• 5-in-1 multifunction pool treatment

• Slow-dissolving 200g tablets

• Continuous chlorine-based disinfection

• Helps control algae

• Supports flocculation and clearer water

• Simplifies routine pool maintenance

• 5kg format suitable for regular use

How much 5-in-1 chlorine should I use?

The available product instructions recommend one 200g tablet per 30 m³ of pool water. Check the chlorine level regularly, as the required treatment can vary depending on water temperature, bathing load and pool conditions.

What is the difference between multifunction chlorine and slow chlorine?

Slow chlorine is primarily intended to maintain continuous disinfection. 5-in-1 multifunction chlorine combines chlorine disinfection with additional pool-care actions such as algae control, flocculation and water clarification, making it a more comprehensive regular-maintenance product.

Practical information and safety

Format: 5kg bucket
Tablet size: 200g
Product type: 5-in-1 multifunction chlorine tablets
Use: regular swimming pool treatment

Use biocides safely. Always read the label and product information before use.

Keep out of reach of children. Do not mix with other chemicals or acids. Use outdoors or in a well-ventilated area and keep the container tightly closed when stored.

FAQ

How many 200g chlorine tablets should I use?

Use one tablet per 30 m³ of pool water, then monitor the chlorine level and adjust treatment according to water conditions.

Where should I put the tablet?

Place it in the swimming pool skimmer or in a suitable floating chlorine dispenser.

What pH should the pool have before adding the tablet?

Adjust the pH to between 7.0 and 7.4 before treatment.

How often should I add a new tablet?

There is no universal fixed frequency. Pool temperature, usage and the measured chlorine level determine when additional treatment is required.

Can I put the tablet directly into the pool?

No. Use a skimmer or suitable floating dispenser to avoid direct contact between the concentrated product and pool surfaces.